FUJII DENKO > Quality Control and Comprehensive Testing Hall
Quality control based on strict inspection standards and Comprehensive testing hall equipped with facilities that can perform all testing. These gain trust of FUJIIDENKO brand.
Thorough inspection is performed at each process from raw materials to finished products.
Our comprehensive testing hall can perform specialized tests for each product. We have sumptuously introduced various testing equipment unprecedented in the world and perform all
tests required to achieve high-performance and high-quality of products.
Since we handle products protecting human lives, we have established our own standards which are stricter than the domestic official standards, and have carried out thorough
quality control in each process from raw materials to parts and finished products.
Indoor fall testing tower (9m) / Impact load measuring system
Strength Testing Equipment
- 500kN horizontal type tension tester
- 150kN vertical type tension tester
- 100kN vertical type tension tester
- 50kN horizontal type tension tester
- 5kN vertical type tension tester
Clients judge the product performance by actual use at our testing hall.
Our comprehensive testing hall performs many tests for each product and process. In the final testing for finished products, clients are present at the test in the testing hall.
They actually use the products and judge the product performance. As a result, some products will pass, others may be difficult to use and need further improvement.
Both safety and efficiency are evaluated. For these verification tests, it is necessary to determine the product performance in actual use, so practical testing facilities assumed construction sites such as electric power and construction are essential.
Therefore, we have installed four steel towers at outdoor.
The highest tower is 35m. In addition, if there are new client demands and new product development is needed, not only existing testing equipment but also new one may be necessary. Even though we have to take high-mix low-volume production method due to characteristics of our products, we absolutely make sure the quality of each product.
Digital microscope system
Spring fatigue tester
X-ray fluorescent system
Towers for testing located outside of the experiment station
Accelerated weathering tester
100kV AC withstand voltage tester
Other Testing Equipment
- Salt spray tester
- Magnetic flaw detector
- Three-demensional measuring machine
- Hardness testing machine (5sorts)
- Metallurgical microscope
- Abrasion resistance performance tester (Rope, Belt)
- Low-temperature tester
- Thermo-hygrostat
- Plating thickness measure
- PH measure